FEATURES
- Full Mortise, Square Corner, Standard Weight Template
Hinge.
- Material Gauge
- Plain Bearing or Concealed Bearing
- Screw packages - All Machine Screws (AMS) and
- All
Wood Screws (AWS).
- Machine Screws - Phillips(#1) Flat-head -12 x 24 x 1/2"
- Wood Screws - Phillips(#1) Flat-head -12 x 1-1/4"
OPTIONS
- DH-C700BR - Brass Base Metal
- DH-C700SS - Stainless Steel Base Metal
- DH-CB700BR - Brass Base Metal
- DH-CB700SS - Stainless Steel Base Metal
|
SPECIFICATIONS
Hinges - Hinges shall be by TA model number DH-C700 (or
DH-CB700, DH-CB700BR orDH-CB700SS). Hinges to be provided in the type and
size as recommended by the Manufacturer. All hinges to be 3 knuckle plain
bearing or two ball bearings with non-rising pins as listed in hardware
groupings and shall be provided with the width available that will clear
trim to allow for maximum degree of swing. Provide stainless steel and
Hospital tips where listed in hardware groupings.
- Doors less than 60 inches high - provide 2 hinges
- Doors 60 to 90 inches high - Provide 3 hinges
- Doors over 90 inches high - provide 4 hinges
CODE COMPLIANCE
- ANSI Type A8133-3(DH-C700) and A8112-3(DH-CB700)
- Meets USA Federal Spec. #FF-H-116C
- C-UBC - California Uniform Builders Code -2001
- NFPA-80- National Fire Protection Association - 1999
- NFPA101-National Fire Protection -Life Safety- 2000
PACKAGING INFORMATION
- Size 4-1/2" - 3 Hinges per BOX and 48 per Carton.
- Size 5" - 3 Hinges per BOX and 24 per Carton.
|
