FEATURES
- Full Mortise, Square Corner, Heavy Weight Steel Template
Hinge.
- Material Gauge - .180.(4-1/2") and .190 (5")
- Four Ball Bearings
- Stock Sizes 4-1/2" x 4-1/2" and 5" x 4-1/2"
- Screw packages - All Machine Screws (AMS) and - Half Wood
Screws (1/2WS).
- Machine Screws - Phillips(#1) Flat-head -12 x 24 x 1/2"v
- Wood Screws - Phillips(#1) Flat-head -12 x 1-1/4"
OPTIONS
- NRP - Non-Removable Pin with Set Screw.
- DH-BB168BR - Brass Base Metal
- DH-BB168SS - Stainless Steel Base Metal - 32D
|
SPECIFICATIONS
Hinges - Hinges shall be by TA model number DH-BB168 (or
DH- BB168BR or DH-BB168SS). Hinges to be provided in the type and size as
recommended by the Manufacturer. All hinges to be four ball bearings with
non-rising pins and shall be provided with the width available that will
clear trim to allow for maximum degree of swing. Provide stainless steel
and Hospital tips where listed in hardware groupings.
- Doors less than 60 inches high - provide 2 hinges
- Doors 60 to 90 inches high - Provide 3 hinges
- Doors over 90 inches high - provide 4 hinges
CODE COMPLIANCE
- ANSI Type A8111 (DH-BB168)
- Meets USA Federal Spec. #FF-H-116C
- C-UBC - California Uniform Builders Code -2001
- NFPA-80- National Fire Protection Association -1999
- NFPA101-National Fire Protection -Life Safety- 2000
PACKAGING INFORMATION
- 3 Hinges per BOX and 24 per Carton.
|
