FEATURES
- Full mortise, square corner, standard weight steel
template hinge.
- Material Gauge -.123, 4" -.130, 4-1/2"-.134, 5"-.145
- Plain Bearing or Ball Bearing
- Screw packages -All Machine Screws (AMS) and -All Wood Screws (AWS).
- Machine screws -Phillips(#1) Flat head -12 x 24 x ½"
- Wood Screws -Phillips(#1) Flat head -12 x 1-1 /4"
OPTIONS
- NRP - Non-Removable pin with set screw.
- DH-BB179-BR - Brass Base Metal.
- DH-BB179-SS - Stainless Steel Base Metal. (32D)
|
SPECIFICATIONS
Hinges -Hinges shall be by TA model number DH-BB179 (or DH179, DH-179BR
or DH-BB179SS). Hinges to be provided in the type and size as recommended
by the manufacture. All hinges to be 5 knuckle plain bearing or two ball
bearings with non-rising pins as listed in hardware groupings and shall be
provided with the width available that will clear trim to allow for
maximum degree of swing. Provide stainless steel and brass base material
where noted.
- Doors less than 60 inches high -provide 2 hinges
- Doors 60 to 90 inches high -Provide 3 hinges
- Doors over 90 inches high -provide 4 hinges
CODE COMPLIANCE
- ANSI Type A8133(DH-179) and A8112(DH-BB179)
- Meets USA Federal Spec. #FF-H-116C
- C-UBC - California Uniform Builders Code -2001
- NFPA-80-National Fire Protection Association -1999
- NFPA101-National Fire Protection -Life Safety-2000
PACKAGING INFORMATION
- Size 4" & 4-1/2" -3 Hinges per BOX and 48 per Carton.
- Size 5" -3 Hinges per BOX and 24 per
Carton
|
