FEATURES
- Full mortise, 1/4" Radius Corner, Standard Weight Steel
Template Hinge.
- Material Gauge - 3-1/2" =.119, 4" =.129
- Plain Bearing
- Ball Bearing Available Only in 4 x 4.
- Screw packages - All Machine Screws (AMS) and All Wood
Screws (AWS).
- 3-1/2" - AMS (10x24x1 /2) and1/2 WS (9 x 1")
- 4" - AMS (12 x 24 x1 /2) and1/2 WS (12 x 1-1/4")
OPTIONS
- NRP - Non-Removable Pin with Set Screw on 4 x 4 only.
|
SPECIFICATIONS
Hinges - Hinges shall be by TA model number DH-RC179 (or
DH-RCBB179). Hinges to be provided in the type and size as recommended by
the Manufacturer. All hinges to be 5 knuckle, 1 /4” radius corner, plain
bearing or two ball bearings with non-rising pins as listed in hardware
groupings and shall be provided with the width available that will clear
trim to allow for maximum degree of swing.
- Doors less than 60 inches high - Provide 2 hinges
- Doors 60 to 90 inches high - Provide 3 hinges
- Doors over 90 inches high - Provide 4 hinges
CODE COMPLIANCE
- ANSI Type A8133-1/4"(DH-RC179) and A8112-1/4"(DH-RCBB179)
- Meets USA Federal Spec. #FF-H-116C
- C-UBC - California Uniform Builders Code - 2001
- NFPA-80 - National Fire Protection Association - 1999
- NFPA101-National Fire Protection - Life Safety - 2000
PACKAGING INFORMATION
- Size 3-1/2 x 3-1/2 - 2 Hinges per BOX and 100 per Carton.
- Size 4 x 4 - 3 Hinges per BOX and 48 per Carton.
|
